Call us for Inquiry : +91 98793 75421
Slide 1 Slide 2 Slide 3 Slide 1 Slide 2 Slide 4 Slide 5
products
Sleep Apnea
  CPAP
  BiPAP
  Mask
  Diagnostic
Oxygen Concentrator
Critical Care Equipment
  Ventilator
  Intensive Care Devices
Cardiology Equipment
Peripheral Arterial Disease (PAD) Diagnostics
Refurbished Medical Equipment
Disposable
  Instruments for Laproscopic Surgeries
  Respiratory Health
  Digestive Health
  Surgical Mesh Implants
Pain Management
  Photomedicine
  TENS Devices
Pulmonary Lab
Telematry Device
pain management - Photomedicine


Warp 10 Photomedicine Device

About the Quantum Light WARP 10

The innovative WARP 10 is brought to you by Quantum Devices, Inc. (QDI); the company that invented HEALS® (High Emissivity Aluminiferous Luminescent Substrate), solid-state lighting systems for NASA that have become the gold standards for photobiomodulation (PBMT) research, photo dynamic cancer therapy and agriculture research.

Qauntum light systems - the WARP 10 is a high intensity, hand-held, portable, LED (light emitting diode) unit, intended for the treatment of chronic pain by emitting energy in the near-infrared (near- IR) spectrum. This infared therapy provides temporary minor muscle and joint pain relief, arthritis and muscle spasms; and relieving stiffness, promoting relaxation of muscle tissue and temporarily increasing local blood circulation, where applied. It also provides unique skin rejuvenation through photorejuvenation. 

Features

  • High intensity 60 mW/cm2 illuminated surface produces 5 Joules/cm2 dose in 88 seconds
  • Large 10 cm2 treatment area
  • Dose accuracy controlled by an electronic timing circuit (timer)
  • Remains cool to the touch
  • Easy to operate with one hand
  • Approximately 50 doses with eight (8) “AA” NiMH Rechargeable Batteries
  • “Low Battery” indicator light to ensure full dose delivery
  • Certified wavelength (670 nm) and power output

The WARP 10 light delivery system is used for applying therapy for the mitigation of chronic pain by emitting NIR light via an LED (light emitting diode) energy source. System controls are conveniently located on the top panel for easy light dose delivery. This device is solid state and handheld for placement directly on the skin where treatment is to occur. Recommended treatment can be one or more timed light delivery cycles to the treatment area per day.

Light Source of Choice

Originally developed under a contract for the Defense Advanced Research Projects Agency (DARPA) by QDI, the pioneers of the NASA HEALS technology, the WARP 10 is designed to assist armed forces personnel on the front lines with immediate first aid and care for minor injuries and pain. Thereby improving endurance in combat.

Graphs

The WARP 10 Difference 

In addition to the benefit of providing localized pain relief, biologists have discovered that cells exposed to NIR light from LEDs grow 150% to 200% faster with the intensity of light only provided by the WARP 10 HEALS technology. A single daily dose of this intensity of light is thought to stimulate the basic energy process of the mitochondria (energy compartment) of each cell to support the healing process.

The hand-held WARP 10 produces 60 mW/cm2 of photon flux (power) in the NIR portion of the electromagnetic spectrum (650-950nm), which is defined as the wellness spectrum. The figure above illustrates that the WARP 10 will produce 80 times more photon energy than a 250 Watt heat lamp or 6.4 times more photon energy than the Solar “Air Mass 1.5 Standard,” as compared to the same spectral bandwidth of the WARP 10. The HEALS technology advantage reduces the time required for each therapeutic dose and provides for faster multi-dose exposures without the harmful affects of UV (Ultra- Violet) solar radiation.

Applications

Pain: arthritis pain relief and muscle and joint pain
Equine: treatable conditions for your animals
Aesthetics: wrinkles and other kinds of skin damage

Wrap10 Package Warp 10® Dimensions:
5.55 in. (141mm) x 2.65 in. (67nm) x 2.0 in. (51mm)

Weight (with Batteries):
1.2 pounds (547 grams) with Batteries

DC Battery Power Requirements, per WARP 10®:
Eight (8) Size AA Standard 1.5V Alkaline,
(type AA, LR6, 15A)
or Eight (8)Size AA Rechargeable NiMH, (type AA)

Environmental Specifications:
Operating Temp: 50° to 104° F / 10° to 40° C
Storage Temp: -22° to 131° F / -30° to 55°C

Relative Humidity:
10 to 95% Non-condensing, for Storage
Home
About Us
Products
Customer Support
Inquiry
Contact Us
Sleep Apnea - CPAP
Sleep Apnea - BiPAP
Sleep Apnea - Mask
Sleep Apnea - Diagnostic
Oxygen Concentrator
Critical Care Equipment - Ventilator
Critical Care Equipment - Intensive Care Devices
Cardiology Equipment
Peripheral Arterial Disease (PAD) Diagnostics
Refurbished Medical Equipment
 
Disposable - Instruments for Laproscopic Surgeries
Disposable - Respiratory Health
Disposable - Digestive Health
Disposable - Surgical Mesh Implants
Pain Management - Photomedicine
Pain Management - Body Clock TENS
Pulmonary Lab
Telematry Device
Tele Cardiology
Ambulatory Blood Pressure Monitoring
EECP Therapy 
Rental Of CPAP, BiPAP, Ventilator